1100 & 2100 SERIES V-RAKES
The Rake Arm Pivot Joint provides flexibility for the rake beam in uneven ground conditions unlike most competitors.
The Rake Wheel Pivots also provides additional ground flexibility.
Raking width on the 1100 series rakes can be adjusted to 3 different positions with the pin and fine-tuned by adjusting the turnbuckle screw. The hitch jack is used to adjust the windrow width.
A single acting cylinder coupled with a simple linkage system allows for easy raising and lowering of rake wings.
High Clearance Action Rakes features a "KWIK PIK" (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
An Adjustable Hitch allows you to level the rake for efficient raking.
Right and left side raking is done easily by turning either one of the wing transport valves off.
A 49" Center Kicker Wheel is optional on all Action Rakes.
The hitch jack is used to adjust the windrow width as shown.
Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
The operator can adjust the fine tune spring to allow proper rake wheel down pressure on each arm of either rake.