Model 2957
Left-Hand Discharge
Bale Processor

  • Exclusive rocking cradle design handles all types of bales
  • Process high moisture hay and silage bales
  • Left or Right discharge
  • Load up to 20 small square bales
  • Full adjustable loading forks handle all sizes of bales
  • Simple hydraulic valving activates cradle rock and speed
  • Easy cradle travel adjustment
  • Built in PTO shaft & hydraulic hose storage bracket
  • No belts, no chains
  • Hydraulic lift available
  • Unibody frame construction with high clearance
  • Deflector windrows product or feeds directly into bunks
  • Easy access to shear pin
  • Remove twine through access door opposite of discharge
  • Optional hydraulic deflector lift
  • Fully adjustable clevis hitch
  • 12.5 x 15 Treaded Tires
      • Heavy-gauge steel & strong welds

        With heavy-gauge steel and strong welds, the bale processors shred round or square hay bales, corn stalk bales, and even baleage bales easily!

      • Heavy-gauge steel & strong welds

        With heavy-gauge steel and strong welds, the bale processors shred round or square hay bales, corn stalk bales, and even baleage bales easily!

      • Remove twine easily

        Remove twine through the easy access door opposite of the discharge.

      • Remove twine easily

        Remove twine through the easy access door opposite of the discharge.

2957
OVERALL LENGTH 193″
WIDTH 119″
HEIGHT (BODY ONLY) 98″
TIRES 12.5 X 15
EMPTY WEIGHT 5,220 LBS
PTO 1-⅜″ 21 SPLINE 1000 RPM CV
HEAVY DUTY HITCH JACK
ADJUSTABLE HITCH W/ HEAVY DUTY CLEVIS
HYDRAULIC CIRCUITS REQUIRED STANDARD - 2 3RD REMOTE NEEDED FOR HYD. DEFLECTOR
CHAMBER LENGTH 95″
ROTOR SWING DIAMETER 25 ⅛″
NUMBER OF HAMMERS 32
HAMMER SIZE ½″ X 2″ X 5¼″
ROTOR LENGTH 83″
WHEEL TRACK 96″
MIN. HORSEPOWER 120 HP
OPTIONAL HYDRAULIC DEFLECTOR LIFT AVAILABLE
DISCHARGE SIDE RIGHT
2958
OVERALL LENGTH 193″
WIDTH 119″
HEIGHT (BODY ONLY) 98″
TIRES 12.5 X 15
EMPTY WEIGHT 5,260 LBS
PTO 1-⅜″ 21 SPLINE 1000 RPM CV
HEAVY DUTY HITCH JACK
ADJUSTABLE HITCH W/ HEAVY DUTY CLEVIS
HYDRAULIC CIRCUITS REQUIRED STANDARD - 2 3RD REMOTE NEEDED FOR HYD. DEFLECTOR
CHAMBER LENGTH 95″
ROTOR SWING DIAMETER 25 ⅛″
NUMBER OF HAMMERS 32
HAMMER SIZE ½″ X 2″ X 5¼″
ROTOR LENGTH 83″
WHEEL TRACK 96″
MIN. HORSEPOWER 120 HP
OPTIONAL HYDRAULIC DEFLECTOR LIFT AVAILABLE
DISCHARGE SIDE LEFT

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.