Xtracap Forage Boxes

  • XTRACAP Forage Boxes are available in 17′, 19′, and 21′ lengths with a chain, or twin auger cross-conveyor unload system.
  • Both models are available in Front Unload or Front and Rear Unload.
  • H&S uses three – 18″ 4 bar H.D. spiral type beaters – not augers. Aggressive in handling tough material, they are even feeding. All three beaters are mounted in the head, not auxiliary panels in the box. Beater shafts are 1¼″ equipped with greaseable bearings.
  • H&S utilizes a deep stagger beater design. The beaters turn progressively faster from top to bottom. The slow turning top beater does not pitch chunks forward, it undercuts the heap and feeds tough material down where the bottom beaters go to work delivering a smooth even flow to the cross conveyor.
  • The cross conveyor is 22″ wide, is equipped with 550 roller chain, and extends 12″ beyond the side of the head.
  • A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity. A bronze worm gear is standard. The main apron drive shaft is 1¾″. #80 drive chain drives the main apron drive shaft.
  • A separate dual belt drive clutch allows you to start and clear the beaters before you start the main apron conveyors. The clutch system can be used to engage just the cross conveyor, the cross conveyor and beaters, or the cross conveyor, beaters and main floor apron in any speed. The emergency stop mechanism is built into the drive unit and can be activated from the front, sides or rear of the box.
  • The twin augers extend 11″ beyond the side of the head. A built in auger extension is standard and eliminates spillage between box and blower.
  • The twin auger utilizes two – 10″ high speed cross augers equipped with hold-downs and wipers. The auger housings are poly-lined to reduce build-up.
  • When being used as a front unload box, the drive lock pin is locked into the front main apron drive sprocket.
  • To switch to rear unload, simply remove the drive lock pin from the front apron drive sprocket and insert it into the rear apron drive sprocket. A three shaft system (drive, tightener and idler shafts) maintain proper chain tension and positive drive. Once the tailgate safety lock is released, the self-locking mechanism unlocks automatically while rear unloading and locks shut when the tailgate closes.
  • Transport lights are standard on all H&S boxes.
  • An optional 12″ or 24″ folding cross conveyor extension is available for apron unload models.
  • A Front hydraulic drive is optional.
      • Auger Extension

        The twin augers extend 11″ beyond the side of the head. A built in auger extension is standard and eliminates spillage between box and blower.

      • Auger Extension

        The twin augers extend 11″ beyond the side of the head. A built in auger extension is standard and eliminates spillage between box and blower.

      • Augers

        The twin auger utilizes two – 10″ high speed cross augers equipped with hold-downs and wipers. The auger housings are poly-lined to reduce build-up.

      • Augers

        The twin auger utilizes two – 10″ high speed cross augers equipped with hold-downs and wipers. The auger housings are poly-lined to reduce build-up.

      • Beaters & Cross Conveyor

        H&S utilizes a deep stagger beater design. The beaters turn progressively faster from top to bottom.

      • Beaters & Cross Conveyor

        H&S utilizes a deep stagger beater design. The beaters turn progressively faster from top to bottom. The slow turning top beater does not pitch chunks forward, it undercuts the heap and feeds tough material down where the bottom beaters go to work delivering a smooth even flow to the cross conveyor. The cross conveyor is 22″ wide and is equipped with 550 roller chain. The cross conveyor extends 12″ beyond the side of the head. An optional 12″ or 24″ folding cross conveyor extension is available for apron unload models.

      • Drive System

        A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity. A bronze worm gear is standard. #80 drive chain drives the main apron drive shaft.

      • Drive System

        A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity. A bronze worm gear is standard. #80 drive chain drives the main apron drive shaft.

      • Dual Belt Clutch

        A separate dual belt drive clutch allows you to start and clear the beaters before you start the main apron conveyors.

      • Dual Belt Clutch

        A separate dual belt drive clutch allows you to start and clear the beaters before you start the main apron conveyors. The HD clutch can be used to engage just the cross conveyor, the cross conveyor and beaters, or the cross conveyor, beaters and main floor apron in any speed. The emergency stop mechanism is built into the drive unit and can be activated from the front, sides or rear of the box.

      • Greasable Beaters

        H&S uses three – 18″ 4 bar H.D. spiral type beaters – not augers. Aggressive in handling tough material, they are even feeding.

      • Greasable Beaters

        H&S uses three – 18″ 4 bar H.D. spiral type beaters – not augers. Aggressive in handling tough material, they are even feeding. All three beaters are mounted in the head, not auxiliary panels in the box. Beater shafts are 1¼″ equipped with greasable bearings.

      • Switch From Front To Rear Unload Quickly

        To switch to rear unload simply remove the drive lock pin from the front and insert it into the rear apron drive sprocket. A three shaft system (drive, tightener and idler shafts) maintain proper chain tension and positive drive.

      • Switch From Front To Rear Unload Quickly

        To switch to rear unload simply remove the drive lock pin from the front and insert it into the rear apron drive sprocket. A three shaft system (drive, tightener and idler shafts) maintain proper chain tension and positive drive.

      • Tailgate Safety Lock

        Once the tailgate safety lock is released, the self-locking mechanism unlocks automatically while unloading and locks shut when the tailgate closes.

      • Tailgate Safety Lock

        Once the tailgate safety lock is released, the self-locking mechanism unlocks automatically while unloading and locks shut when the tailgate closes.

      • Transport Lights

        Transport lights are standard on all H&S boxes. Picture to the right is the light configuration on front unload boxes. Pictured to the left is the configuration for rear unload boxes.

      • Transport Lights

        Transport lights are standard on all H&S boxes. Picture to the right is the light configuration on front unload boxes. Pictured to the left is the configuration for rear unload boxes.

XTRACAP 17′
FRONT UNLOAD
CAPACITY W/ROOF - ASAE STANDARD 939 FT
INSIDE WIDTH 7′ 4″
INSIDE HEIGHT
(floor to roof)
99"
OVERALL LENGTH 20′ 3″
OVERALL WIDTH 107″
OVERALL HEIGHT (bolster to roof) 120″
WEIGHT HD 7-4 4550#
WEIGHT HD TWIN AUGER 4600#
T-ROD MAIN APRON CHAIN (standard) 4 – 16,000# TENSILE — 64,000# COMBINED TENSILE
667H PINTLE CHAIN 4 – 10,000# TENSILE — 40,000# COMBINED TENSILE
CROSS FEED – HD 7-4 22″ WIDE – CA550 CHAIN WITH WELDED SLATS / RIGHT OR LEFT HAND DISCHARGE
CROSS FEED – HD TWIN AUGER 2 – 10″ SIDE BY SIDE AUGERS — EQUIPPED WITH ADJUSTABLE HOLD-DOWNS — 22″ WIDE — LEFT HAND ONLY
UNLOADING BEATERS 3 – 18″ – 4 BAR SPIRAL — EVEN FEED
MAIN APRON SPEED VARIABLE SPEED DRIVE — UNLOAD RATE - 9″ PER MIN. UP TO 12′6″ PER MIN.
DRIVE SEQUENCE H&S BRONZE WORM GEAR BOX — #80 ROLLER CHAIN — 1¾″ MAIN APRON DRIVE SHAFT
POWER SOURCE 540 PTO OR HYDRAULIC DRIVE
EMERGENCY STOP CLUTCH STANDARD ON HD & HD FRONT AND REAR UNLOAD
OPTIONS 12″ FOLDING BUNK EXTENSION FOR HD 7-4 MODELS
TRANSPORT LIGHTS AND HOLD DOWN KITS STANDARD
FRONT & REAR UNLOAD*
CAPACITY W/ROOF 960 FT
WEIGHT ADD 520# TO HD BOX WEIGHTS
MAIN APRON CHAIN 667H PINTLE – 10,000# X 4
REAR UNLOAD DRIVE HD 7-4 CHOICE OF HYDRAULIC DRIVE OR P.T.O. DRIVE. / HD TWIN AUGER HYDRAULIC REAR DRIVE ONLY
REAR UNLOAD SPEED UNLOAD TIME IS DEPENDENT ON TRACTOR R.P.M., HYDRAULIC PRESSURE AND G.P.M.
REAR ENDGATE AUTOMATIC LOCK AND UNLOCK
XTRACAP 19′
FRONT UNLOAD
CAPACITY W/ROOF - ASAE STANDARD 1051 FT
INSIDE WIDTH 7′ 4″
INSIDE HEIGHT
(floor to roof)
99″
OVERALL LENGTH 22′ 3″
OVERALL WIDTH 107″
OVERALL HEIGHT (bolster to roof) 120″
WEIGHT HD 7-4 4950#
WEIGHT HD TWIN AUGER 5000#
T-ROD MAIN APRON CHAIN (standard) 4 – 16,000# TENSILE — 64,000# COMBINED TENSILE
667H PINTLE CHAIN 4 – 10,000# TENSILE — 40,000# COMBINED TENSILE
CROSS FEED – HD 7-4 22″ WIDE – CA550 CHAIN WITH WELDED SLATS / RIGHT OR LEFT HAND DISCHARGE
CROSS FEED – HD TWIN AUGER 2 – 10″ SIDE BY SIDE AUGERS — EQUIPPED WITH ADJUSTABLE HOLD-DOWNS — 22″ WIDE — LEFT HAND ONLY
UNLOADING BEATERS 3 – 18″ – 4 BAR SPIRAL — EVEN FEED
MAIN APRON SPEED VARIABLE SPEED DRIVE — UNLOAD RATE - 9″ PER MIN. UP TO 12′ 6″ PER MIN.
DRIVE SEQUENCE H&S BRONZE WORM GEAR BOX — #80 ROLLER CHAIN — 1¾″ MAIN APRON DRIVE SHAFT
POWER SOURCE 540 PTO OR HYDRAULIC DRIVE
EMERGENCY STOP CLUTCH STANDARD ON HD & HD FRONT AND REAR UNLOAD
OPTIONS 12" FOLDING BUNK EXTENSION FOR HD 7-4 MODELS
TRANSPORT LIGHTS AND HOLD DOWN KITS STANDARD
FRONT & REAR UNLOAD*
CAPACITY W/ROOF 1072 FT
WEIGHT ADD 520# TO HD BOX WEIGHTS
MAIN APRON CHAIN 667X PINTLE – 21,000# X 4
REAR UNLOAD DRIVE HD 7-4 CHOICE OF HYDRAULIC DRIVE OR P.T.O. DRIVE. / HD TWIN AUGER HYDRAULIC REAR DRIVE ONLY
REAR UNLOAD SPEED UNLOAD TIME IS DEPENDENT ON TRACTOR R.P.M., HYDRAULIC PRESSURE AND G.P.M.
REAR ENDGATE AUTOMATIC LOCK AND UNLOCK
XTRACAP 21′
FRONT UNLOAD
CAPACITY W/ROOF - ASAE STANDARD 1163 FT
INSIDE WIDTH 7′ 4″
INSIDE HEIGHT
(floor to roof)
99″
OVERALL LENGTH 24′ 3″
OVERALL WIDTH 107″
OVERALL HEIGHT (bolster to roof) 120″
WEIGHT HD 7-4 5350#
WEIGHT HD TWIN AUGER 5400#
T-ROD MAIN APRON CHAIN (standard) 4 – 16,000# TENSILE — 64,000# COMBINED TENSILE
667H PINTLE CHAIN 4 – 10,000# TENSILE — 40,000# COMBINED TENSILE
CROSS FEED – HD 7-4 22″ WIDE – CA550 CHAIN WITH WELDED SLATS / RIGHT OR LEFT HAND DISCHARGE
CROSS FEED – HD TWIN AUGER 2 – 10″ SIDE BY SIDE AUGERS — EQUIPPED WITH ADJUSTABLE HOLD-DOWNS — 22″ WIDE — LEFT HAND ONLY
UNLOADING BEATERS 3 – 18″ – 4 BAR SPIRAL — EVEN FEED
MAIN APRON SPEED VARIABLE SPEED DRIVE — UNLOAD RATE - 9″ PER MIN. UP TO 12′ 6″ PER MIN.
DRIVE SEQUENCE H&S BRONZE WORM GEAR BOX — #80 ROLLER CHAIN — 1¾″ MAIN APRON DRIVE SHAFT
POWER SOURCE 540 PTO OR HYDRAULIC DRIVE
EMERGENCY STOP CLUTCH STANDARD ON HD & HD FRONT AND REAR UNLOAD
OPTIONS 12″ FOLDING BUNK EXTENSION FOR HD 7-4 MODELS
TRANSPORT LIGHTS AND HOLD DOWN KITS STANDARD
FRONT & REAR UNLOAD*
CAPACITY W/ROOF 1184 FT
WEIGHT ADD 520# TO HD BOX WEIGHTS
MAIN APRON CHAIN 667X PINTLE – 21,000# X 4
REAR UNLOAD DRIVE HD 7-4 CHOICE OF HYDRAULIC DRIVE OR P.T.O. DRIVE. / HD TWIN AUGER HYDRAULIC REAR DRIVE ONLY
REAR UNLOAD SPEED UNLOAD TIME IS DEPENDENT ON TRACTOR R.P.M., HYDRAULIC PRESSURE AND G.P.M.
REAR ENDGATE AUTOMATIC LOCK AND UNLOCK

* The FRONT & REAR UNLOAD BOX is available in either HD 7-4 or HD TWIN AUGER configurations.

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

A front hydraulic drive is optional.

An optional 12″ or 24″ folding cross conveyor extension is available for apron unload models.