Heavy Duty Manure Spreader
Model 3127 - 270 Bushel

  • A massive unitized welded frame with heavy floor supports and side stakes, wrap around steel front corners. Strong rear main beater side panels are slanted for clearance and wider spread, and then welded to the strong 5" U channel side members compare with any on the market.
  • The side flares on all H&S “Heavy Duty” manure spreaders are made of 10 gauge g210 culvert grade galvanized steel.
  • Sides, front panel and both sides of the rear hydraulic end gate use fiberglass reinforced plywood to provide for easy cleaning and minimal freeze up. It also features a plastic coated plywood floor. Considerably less torque is needed to move a heavy load.
  • A front splash guard is standard equipment.
  • Greasable bearings.
  • The drive utilizes the patented H&S 2 speed gear box. Shifting is all done in the enclosed two speed/beater shutoff gear box.
  • A 29″ diameter beater with 14 replaceable beater paddles. The beater has two types of paddles, blunt for widespread and sharp ripper type for cutting and shredding. The beater side wiper blades are also standard equipment.
  • Adjustment for the main apron is easy by simply loosening the two side bolts and drawing up the long bolt.
  • Unloading Speed for 3123 and 3127 - (2 speed gear box) High Speed: PTO speed 540 rpm’s 8′9″ per minute Low Speed: PTO speed 540 rpm’s 4′9″ per minute.
      • 2 Speed Apron Drive

        The two-speed apron drive is standard equipment on Model 3127.

      • 2 Speed Apron Drive

        The two-speed apron drive is standard equipment on Model 3127. An optional variable speed hydraulic drive is also available.

      • Apron Adjustment

        Adjustment for the main apron is easy, by simply loosening the two side bolts and drawing up the long bolt.

      • Apron Adjustment

        Adjustment for the main apron is easy, by simply loosening the two side bolts and drawing up the long bolt.

      • Apron Idler Slides

        H&S uses cast special steel alloy apron idler slides instead of idler sprockets making for years of dependable service.

      • Apron Idler Slides

        H&S uses cast special steel alloy apron idler slides instead of idler sprockets making for years of dependable service.

      • Beaters

        H&S Spreader model 3127 has a 29″ diameter beater with 14 replaceable beater paddles.

      • Beaters

        H&S Spreader model 3127 has a 29″ diameter beater with 14 replaceable beater paddles. The beater has two types of paddles, blunt for widespread and sharp ripper type for cutting and shredding. The beater side wiper blades are also standard equipment on Model 3127.

      • Easy Clean Out

        Sides, front panel and both sides of the rear hydraulic end gate on the 3127 uses fiberglass reinforced plywood to provide for easy cleaning and minimal freeze up.

      • Easy Clean Out

        Sides, front panel and both sides of the rear hydraulic end gate on the 3127 uses fiberglass reinforced plywood to provide for easy cleaning and minimal freeze up. The 3127 model features a plastic coated plywood floor. Considerably less torque is needed to move a heavy load.

      • Gear Box

        Gear box mechanisms and drive for the beater and apron on the 3131, 3137, 3143 and W3143 are Timken tapered roller bearing equipped. The beater drive gear box is 1-1½ bevel gear oil bath equipped with a 4-jaw over running clutch for beater shut off. The apron drive is a 50:1 bronze worm gear with shear bolt protection.

      • Gear Box

        Gear box mechanisms and drive for the beater and apron on the 3131, 3137, 3143 and W3143 are Timken tapered roller bearing equipped. The beater drive gear box is 1-1½ bevel gear oil bath equipped with a 4-jaw over running clutch for beater shut off. The apron drive is a 50:1 bronze worm gear with shear bolt protection.

      • Greasable Bearings

        Greasable bearings on all models.

      • Greasable Bearings

        Greasable bearings on all models.

      • Side Flares

        The side flares on all H&S Heavy Duty manure spreaders are made of 10 gauge G210 culvert grade galvanized steel.

      • Side Flares

        The side flares on all H&S Heavy Duty manure spreaders are made of 10 gauge G210 culvert grade galvanized steel.

      • Splash Guard

        Front splash guard is standard equipment on all heavy duty models.

      • Splash Guard

        Front splash guard is standard equipment on all heavy duty models.

      • Unitized Welded Frame

        H&S spreaders have a massive unitized welded frame with heavy floor supports and side stakes, wrap around steel front corners.

      • Unitized Welded Frame

        H&S spreaders have a massive unitized welded frame with heavy floor supports and side stakes, wrap around steel front corners. Strong rear main beater side panels are slanted for clearance and wider spread, and then welded to the strong 5″ U channel side members. Compare with any on the market.

3123
CAPACITY - OLD RATING 235 B.U.
CAPACITY CU. FT. STRUCK LEVEL 143
TOP OF FLARE WIDTH 68″ (173 CM)
INSIDE WIDTH 60″ (152 CM)
INSIDE LENGTH 12′ 1″ (3.7 M)
INSIDE DEPTH 28 ⅜″ (72 CM)
OVERALL WIDTH W/STANDARD TIRES 94 ½″ (240 CM)
OVERALL LENGTH 18′ 6″ (5.7 M)
OVERALL LOADING HEIGHT-TOP OF FLARE 51.5″ (131 CM)
OVERALL HEIGHT W/HYD. ENDGATE 55″ (140 CM)
DIAMETER OF BEATER 29″ (74 CM)
MAIN APRON CHAIN T-ROD
UPPER BEATER OPTIONAL
SPINDLE SIZE 2″ (5 CM)
STANDARD TIRE SIZE 295x22.5 RECAP
WEIGHT W/TIRES 2890# (1,311 KG)
REAR HYDRAULIC ENDGATE STANDARD
SEMI LIQUID REAR PAN OPTIONAL
PTO SPEED 540
JACK STARDARD
DRIVE 2 SPEED
VARIABLE SPEED HYD. DRIVE OPTIONAL
FRONT SPLASH PANEL STANDARD
HYD. CYL ON HYD. ENDGATE 1-STANDARD 2ND OPTIONAL    
3127
CAPACITY - OLD RATING 270 B.U.
CAPACITY CU. FT. STRUCK LEVEL 167
TOP OF FLARE WIDTH 68″ (173 CM)
INSIDE WIDTH 60″ (152 CM)
INSIDE LENGTH 14′ 1″ (4.3 M)
INSIDE DEPTH 28 ⅜″ (72 CM)
OVERALL WIDTH W/STANDARD TIRES 94 ½″ (240 CM)
OVERALL LENGTH 20′ 5.5″ (6.3 M)
OVERALL LOADING HEIGHT-TOP OF FLARE 51.5″ (131 CM)
OVERALL HEIGHT W/HYD. ENDGATE 55″ (140 CM)
DIAMETER OF BEATER 29″ (74 CM)
MAIN APRON CHAIN T-ROD
UPPER BEATER OPTIONAL
SPINDLE SIZE 2 ½″ (6 CM)
STANDARD TIRE SIZE 295x22.5 RECAP
WEIGHT W/TIRES 3230# (1,495 KG)
REAR HYDRAULIC ENDGATE STANDARD
SEMI LIQUID REAR PAN OPTIONAL
PTO SPEED 540
JACK STARDARD
DRIVE 2 SPEED
VARIABLE SPEED HYD. DRIVE OPTIONAL
FRONT SPLASH PANEL STANDARD
HYD. CYL ON HYD. ENDGATE 1-STANDARD 2ND OPTIONAL    
3131
CAPACITY - OLD RATING 310 B.U.
CAPACITY CU. FT. STRUCK LEVEL 185
TOP OF FLARE WIDTH 68″ (173 CM)
INSIDE WIDTH 60″ (152 CM)
INSIDE LENGTH 15′ 7″ (4.8 M)
INSIDE DEPTH 28 ⅜″ (72 CM)
OVERALL WIDTH W/STANDARD TIRES 98″ (249 CM)
OVERALL LENGTH 21′ 11.5″ (6.7 M)
OVERALL LOADING HEIGHT-TOP OF FLARE 51.5″ (131 CM)
OVERALL HEIGHT W/HYD. ENDGATE 55″ (140 CM)
DIAMETER OF BEATER 29″ (74 CM)
MAIN APRON CHAIN T-ROD
UPPER BEATER OPTIONAL
SPINDLE SIZE 2 ¼″ (6 CM)
STANDARD TIRE SIZE 295x22.5 RECAP
WEIGHT W/TIRES 4190# (1,901 KG)
REAR HYDRAULIC ENDGATE STANDARD
SEMI LIQUID REAR PAN OPTIONAL
PTO SPEED 540 STANDARD 1000 OPTIONAL 
JACK STARDARD
DRIVE 2 SPEED
VARIABLE SPEED HYD. DRIVE OPTIONAL
FRONT SPLASH PANEL STANDARD
HYD. CYL ON HYD. ENDGATE 1-STANDARD 2ND OPTIONAL

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

A variable speed hydraulic drive is also available on 3123, 3127, 3131, 3137, 3143, and W3143.

Top beater to provide load leveling and spreading of high heaped loads is available on 3123, 3127, 3131, and 3137.

A rear pan is optional on all models.

A semi-liquid hydraulic end gate is standard equipment on all models. An optional second hydraulic end gate cylinder is available for the 3123, 3127, and 3131. The hydraulic lines are run through a 3x3 tube under the floor. The upright position of the hydraulic cylinder stroke allows the gate to lift with the least strain at pivot points.