FLEX-FRAME WHEEL RAKES

  • H&S Flex-Frame wheel rakes are available in 16, 18, 20, and 22 wheel models.
  • The raking wheels are positioned ahead of the rake arms, main frame beams and transport wheels. coupled with a high and wide end of frame, there are no hang-up points or restrictions when raking the heaviest of hay crops.
  • The rake beams and rake arms feature flex-joints for maximum flexibility over the terrain.
  • A brake band on each front gauge wheels can be easily adjusted to field conditions.
  • Large independent 60″ rake wheels with “Bee Hive” style spring suspension follow the contours of the ground smoothly.
  • A large diameter rake wheel hub is used for added strength to the rake wheel dish.
  • The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the Flex-Frame wheel rakes to fit varying conditions.
  • The rake arms feature 2 ball bearings on each end of the arm for long life, smooth operation, and less wear than rakes with bushings.
  • The 60″ diameter rake wheels turn slower for less tooth wear and deliver more capacity.
  • Windrow width adjustment is made by a ratchet jack. A Hydraulic Rear Windrow Width Adjustment is Optional.
  • Each rake beams articulates and flexes independently.
  • Raking widths can be hydraulically adjusted in any position up to the pre-determined raking width. Setting the spring loaded stop allows you to set a pre-determined raking width.
  • Rake wheel wind boards are standard on the Flex-Frame Rakes.
  • Optional rear limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks.
  • A center kicker wheel assembly is optional.
      • Rake Arm

        Rake Arm Flex Joint

      • Rake Arm

        Rake Arm Flex Joint

      • Rake Beam

        Rake Beam Flex Joint.

      • Rake Beam

        Rake Beam Flex Joint

6116
NUMBER OF WHEELS 16
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Ball Bearings
RAKE WHEEL ANTI-WRAP SHIELDS Standard
RAKE WHEEL SUSPENSION Independent “Bee Hive” Spring
TRANSPORT WIDTH 10′ 6″
TRANSPORT LENGTH 32′ 7″
TRANSPORT HEIGHT IN TRANSPORT POSITION 80″ w/SMV Sign
MAXIMUM RAKING WIDTH 32′
WINDROW WIDTH ADJUSTMENT 3′ TO 5′
NUMBER OF RAKING POISTIONS 6
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Nut/Threaded Rod
RAKE WHEEL WIND PANELS Standard
HYDRAULIC REAR WINDOW ADJUSTMENT Optional
HITCH JACK Standard
WEIGHT 5750#
CENTER KICKER WHEEL Optional
HYDRAULIC REQUIREMENTS 1 Double Acting Cylinder For Folding
FRONT GAUGE WHEELS 4 - 9.5L X 15
STANDARD SINGLE REAR TRANSPORT WHELS 2 - 9.5L X 15
OPTIONAL TANDEM REAR TRANSPORT WHELS 4 - 9.5L X 15
TRANSPORT LIGHTING Optional
6118
NUMBER OF WHEELS 18
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Ball Bearings
RAKE WHEEL ANTI-WRAP SHIELDS Standard
RAKE WHEEL SUSPENSION Independent “Bee Hive” Spring
TRANSPORT WIDTH 11′ 6″
TRANSPORT LENGTH 34′ 8″
TRANSPORT HEIGHT IN TRANSPORT POISITION N/A
MAXIMUM RAKING WIDTH 35′ 6″
WINDROW WIDTH ADJUSTMENT 3′ TO 5′
NUMBER OF RAKING POISTIONS 6
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Nut/Threaded Rod
RAKE WHEEL WIND PANELS Standard
HYDRAULIC REAR WINDOW ADJUSTMENT Optional
HITCH JACK Standard
WEIGHT 7894#
CENTER KICKER WHEEL Optional
HYDRAULIC REQUIREMENTS 1 Double Acting Cylinder For Folding
FRONT GAUGE WHEELS 4 - 11L X 15
STANDARD SINGLE REAR TRANSPORT WHELS 2 - 11L X 15
OPTIONAL TANDEM REAR TRANSPORT WHELS 4 - 11L X 15
TRANSPORT LIGHTING Optional
6120
NUMBER OF WHEELS 20
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Ball Bearings
RAKE WHEEL ANTI-WRAP SHIELDS Standard
RAKE WHEEL SUSPENSION Independent “Bee Hive” Spring
TRANSPORT WIDTH 11′ 6″
TRANSPORT LENGTH 37′ 6″
TRANSPORT HEIGHT IN TRANSPORT POISITION N/A
MAXIMUM RAKING WIDTH 38′ 6″
WINDROW WIDTH ADJUSTMENT 3′ TO 5′
NUMBER OF RAKING POISTIONS 6
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Nut/Threaded Rod
RAKE WHEEL WIND PANELS Standard
HYDRAULIC REAR WINDOW ADJUSTMENT Optional
HITCH JACK Standard
WEIGHT 8224#
CENTER KICKER WHEEL Optional
HYDRAULIC REQUIREMENTS 1 Double Acting Cylinder For Folding
FRONT GAUGE WHEELS 4 - 11L X 15
STANDARD SINGLE REAR TRANSPORT WHELS 2 - 11L X 15
OPTIONAL TANDEM REAR TRANSPORT WHELS 4 - 11L X 15
TRANSPORT LIGHTING Optional
6122
NUMBER OF WHEELS 22
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Ball Bearings
RAKE WHEEL ANTI-WRAP SHIELDS Standard
RAKE WHEEL SUSPENSION Independent “Bee Hive” Spring
TRANSPORT WIDTH 11′ 6″
TRANSPORT LENGTH 40′ 6″
TRANSPORT HEIGHT IN TRANSPORT POISITION N/A
MAXIMUM RAKING WIDTH 41′ 6″
WINDROW WIDTH ADJUSTMENT 3′ TO 5′
NUMBER OF RAKING POISTIONS 6
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Nut/Threaded Rod
RAKE WHEEL WIND PANELS Standard
HYDRAULIC REAR WINDOW ADJUSTMENT Optional
HITCH JACK Standard
WEIGHT 8521#
CENTER KICKER WHEEL Optional
HYDRAULIC REQUIREMENTS 1 Double Acting Cylinder For Folding
FRONT GAUGE WHEELS 4 - 11L X 15
STANDARD SINGLE REAR TRANSPORT WHELS 2 - 11L X 15
OPTIONAL TANDEM REAR TRANSPORT WHELS 4 - 11L X 15
TRANSPORT LIGHTING Optional

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

kicker

Optional 3-Wheel Center Kicker Assembly

walking-beams

Optional Rear Tandem Walking Beams

windrow-adjustment

Optional Hydraulic Rear Windrow Adjustment.

2-point-hitch

Optional 2-Point Hitch.

hitch-extension

Optional Hitch Extension.

Transport & Work Lights
(NO PICTURE AVAILABLE)