Hi-Capacity Bifold™ Wheel Rakes
4100 Series

  • Raking wheels positioned ahead of the rake arms, main frame beams and transport wheels.
  • Coupled with a high and wide end of frame there are no hang-up points or restrictions when raking the heaviest of hay crops. Windrow width adjustment is done with a hand crank.
  • Rake opens and closes hydraulically, rake wheels are lowered and raised hydraulically, and the rake wheels float independently.
  • The 12 wheel model Hi-Capacity rake can be configured as both a v-rake or with the right side open as a trailer rake.
  • The rake arms on the 14 and 16 wheel hi-capacity rakes feature 2 roller bearings on each end of the arm for long life, smooth operation and less wear than rakes with bushings.
  • Hi-Capacity rakes fold up to 8′ 6″ or less with the touch of a lever for road transport or to go through gates.
  • Limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks. Standard on the 14 & 16 wheel models and optional on the 12 wheel model.
  • An adjustment for the ground pressure on the rake wheels allows the operator to fine tune the 12, 14 and 16 wheel Hi-Capacity rakes to fit varying conditions.
  • An adjustable brake band on top of the front spindle keeps the front gauge wheels from spinning in rough conditions.

OPTIONS

  • 2 or 3 wheel center kicker assemblies.
  • Rake wheel wind boards.
  • Transport lighting.
  • Safety chain.
  • Limited oscillating offset tandem transport wheels for the 12 wheel model.
  • Set of 15″ front gauge wheels for the 14 and 16 wheel models to help improve float over irrigation tracks.
  • Wrap-around front rake beam with 15″ gauge wheels.
      • Brake Band

        An adjustable brake band on top of the front spindle keeps the front gauge wheels from spinning in rough conditions.

      • Brake Band

        An adjustable brake band on top of the front spindle keeps the front gauge wheels from spinning in rough conditions.

      • Fold

        Hi-Capacity rakes fold up to 8′ 6″ or less with the touch of a lever for road transport or to go through gates.

      • Fold

        Hi-Capacity rakes fold up to 8′ 6″ or less with the touch of a lever for road transport or to go through gates.

      • Ground Pressure

        The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the Hi-Capacity Rake to fit varying conditions.

      • Ground Pressure

        The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the Hi-Capacity Rake to fit varying conditions.

      • Rake Arms

        The rake arms on the 14 and 16 wheel Hi-Capacity Rakes feature 2 roller bearings (see photo) on each end of the arm for long life, smooth operation and less wear than rakes with bushings.

      • Rake Arms

        The rake arms on the 14 and 16 wheel Hi-Capacity Rakes feature 2 roller bearings (see photo) on each end of the arm for long life, smooth operation and less wear than rakes with bushings.

      • Tandem Transport Wheels

        Limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks. Standard on the 14 & 16 wheel models, optional on the 12 wheel model.

      • Tandem Transport Wheels

        Limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks. Standard on the 14 & 16 wheel models, optional on the 12 wheel model.

      • V-Rake or Trailer Rake

        The 12 Wheel model can be configured as both a V-rake or with the right side open as a trailer rake for one sided raking.

      • V-Rake or Trailer Rake

        The 12 Wheel model can be configured as both a V-rake or with the right side open as a trailer rake for one sided raking.

      • Width Adjustment

        The high open, adjustable rear frame allows for the heaviest crop to pass through. Windrow width adjustment is done with a hand crank.

      • Width Adjustment

        The high open, adjustable rear frame allows for the heaviest crop to pass through. Windrow width adjustment is done with a hand crank.

4112
NUMBER OF WHEELS 12
WHEEL DIAMETER 55″
TEETH PER WHEEL 40
TOOTH DIAMETER 7mm
TRANSPORT WIDTH 8′ 6″
TRANSPORT LENGTH 24′ 6″
WINDROW WIDTH ADJUSTMENT 38″- 58″
RAKING WIDTH UP TO 24′ HYD. SET.
RAKING WHEEL HUBS TAPERED BEARINGS
WING FLEX 3′ UP OR DOWN
NUMBER OF TRANSPORT WHEELS 4
HITCH JACK STANDARD
CENTER KICKER WHEELS OPTIONAL
GAUGE WHEELS 15″
TRANSPORT WHEELS 15″
WEIGHT 3500 LBS.
4114
NUMBER OF WHEELS 14
WHEEL DIAMETER 55″
TEETH PER WHEEL 40
TOOTH DIAMETER 7mm
TRANSPORT WIDTH 8′ 6″
TRANSPORT LENGTH 27′ 3″
WINDROW WIDTH ADJUSTMENT 38″- 58″
RAKING WIDTH UP TO 28′ HYD. SET.
RAKING WHEEL HUBS BALL BEARINGS
WING FLEX 3′ UP OR DOWN
NUMBER OF TRANSPORT WHEELS 6
HITCH JACK STANDARD
CENTER KICKER WHEELS OPTIONAL
GAUGE WHEELS 15″
TRANSPORT WHEELS 15″
WEIGHT 3800 LBS.
4116
NUMBER OF WHEELS 16
WHEEL DIAMETER 55″
TEETH PER WHEEL 40
TOOTH DIAMETER 7mm
TRANSPORT WIDTH 8′ 6″
TRANSPORT LENGTH 30′ 3″
WINDROW WIDTH ADJUSTMENT 38″- 58″
RAKING WIDTH UP TO 32′ HYD. SET.
RAKING WHEEL HUBS BALL BEARINGS
WING FLEX 3′ UP OR DOWN
NUMBER OF TRANSPORT WHEELS 6
HITCH JACK STANDARD
CENTER KICKER WHEELS OPTIONAL
GAUGE WHEELS 15″
TRANSPORT WHEELS 15″
WEIGHT 4200 LBS.

An optional set of 15″ front gauge wheels for the 14 and 16 wheel models help improve float over irrigation tracks or rough ground.

2 or 3 wheel kicker assembly available.

Rake wheel wind boards are also available.