Hi-Capacity Bifold™ Wheel Rakes
5100 Series

  • H&S 5114 & 5116 hi-capacity wheel rakes have the raking wheels positioned ahead of the rake arms, main frame beams and transport wheels. coupled with a high and wide end of frame, there are no hang-up points or restrictions when raking the heaviest of hay crops.
  • A brake band on each front gauge wheels can be easily adjusted to field conditions.
  • Large independent 60" rake wheels with “Bee Hive” style spring suspension follow the contours of the ground smoothly.
  • A large diameter rake wheel hub is used for added strength to the rake wheel dish.
  • The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the 5114 and 5116 wheel rakes to fit varying conditions.
  • The rake arms feature 2 ball bearings on each end of the arm for long life, smooth operation, and less wear than rakes with bushings.
  • The 60″ diameter rake wheels turn slower for less tooth wear and deliver more capacity.
  • The windrow width adjustment is done with a hand crank and adjusts windrows from 38″ to 58″ width.
  • Independent articulated rake beams have the flexibility to flex 3′ up, or 3′ down.
  • Limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks.
  • Raking widths can be hydraulically adjusted in any position up to the pre-determined raking width. Setting the spring loaded stop allows you to set pre-determined raking widths up to 28′ on the 5114, and 32′ on the 5116.
  • Rake wheel wind boards are standard on the 5114/5116 Rakes.
  • A 2 or 3 wheel center kicker wheel assembly is optional.
      • Ground Pressure

        The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the 5114 and 5116 wheel rakes to fit varying conditions.

      • Ground Pressure

        The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the 5114 and 5116 wheel rakes to fit varying conditions.

      • Rake Wheel Hub

        A. A large diameter rake wheel hub is used for added strength to the rake wheel dish.

      • Rake Wheel Hub

        A. A large diameter rake wheel hub is used for added strength to the rake wheel dish. B. Independent rake wheel suspension allows the rake wheels to follow the contour of the ground and low maintenance “Bee Hive” style springs support the large 60″ rake wheels. C. The rake arms feature 2 ball bearings on each end of the arm for long life, smooth operation and less wear than rakes with bushings.

      • Rake Wheel Wind Boards

        Rake wheel wind boards are standard.

      • Rake Wheel Wind Boards

        Rake wheel wind boards are standard.

      • Raking Width

        Setting the spring loaded stop allows you to set pre-determined raking widths up to 28′ on the 1460 and 32′ on the 1660. Raking widths can be hydraulically adjusted in any position up to the pre-determined raking width.

      • Raking Width

        Setting the spring loaded stop allows you to set pre-determined raking widths up to 28′ on the 1460 and 32′ on the 1660. Raking widths can be hydraulically adjusted in any position up to the pre-determined raking width.

      • Transport Locks

        A. Storage for transport locks. B. Rake beam transport locks. C. Adjustable height hitch. The standard wrap-a-round gauge wheels give added support to the rake beams.

      • Transport Locks

        A. Storage for transport locks. B. Rake beam transport locks. C. Adjustable height hitch. The standard wrap-a-round gauge wheels give added support to the rake beams.

5114
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
TRANSPORT WIDTH 8′ 8″
TRANSPORT LENGTH 27′ 3″
WINDROW WIDTH ADJUSTMENT 38″- 58″
RAKING WIDTH UP TO 28′ HYD. SET.
RAKING WHEEL HUBS BALL BEARINGS
WING FLEX 3′ UP OR DOWN
NUMBER OF TRANSPORT WHEELS 8
HITCH JACK STANDARD
GAUGE WHEELS 15″
TRANSPORT WHEELS 15″
WEIGHT N/A
DUEL CENTER KICKER WHEELS Optional
TRIPLE CENTER KICKER WHEELS Optional
60″ RAKE WHEEL WIND BOARDS Optional
TRANSPORT LIGHTING & POWER CORD Optional
SAFETY CHAIN Optional
5116
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
TRANSPORT WIDTH 8′ 8″
TRANSPORT LENGTH 30′ 3″
WINDROW WIDTH ADJUSTMENT 38″- 58″
RAKING WIDTH UP TO 32′ HYD. SET.
RAKING WHEEL HUBS BALL BEARINGS
WING FLEX 3′ UP OR DOWN
NUMBER OF TRANSPORT WHEELS 8
HITCH JACK STANDARD
GAUGE WHEELS 15″
TRANSPORT WHEELS 15″
WEIGHT N/A
DUEL CENTER KICKER WHEELS Optional
TRIPLE CENTER KICKER WHEELS Optional
60″ RAKE WHEEL WIND BOARDS Optional
TRANSPORT LIGHTING & POWER CORD Optional
SAFETY CHAIN Optional

A 2 or 3 wheel center kicker assembly is optional for the Hi-Capacity Rakes.