Carted V-Rakes
1100 Series

  • The Rake Arm Pivot Joint provides flexibility for the rake beam in uneven ground conditions unlike most competitors.
  • The Rake Wheel Pivots also provides additional ground flexibility.
  • Raking width on the 1100 series rakes can be adjusted to 3 different positions with the pin and fine-tuned by adjusting the turnbuckle screw. The hitch jack is used to adjust the windrow width.
  • A single acting cylinder coupled with a simple linkage system allows for easy raising and lowering of rake wings.
      • Fine Tune Spring

        The operator can adjust the fine tune spring to allow proper rake wheel down pressure on each arm of either rake.

      • Fine Tune Spring

        The operator can adjust the fine tune spring to allow proper rake wheel down pressure on each arm of either rake.

      • Linkage System

        A single acting cylinder coupled with a simple linkage system allows for easy raising and lowering of rake wings.

      • Linkage System

        A single acting cylinder coupled with a simple linkage system allows for easy raising and lowering of rake wings.

      • Rake Arm Pivot Joint

        The Rake Arm Pivot Joint provides flexibility for the rake beam in uneven ground conditions unlike most competitors.

      • Rake Arm Pivot Joint

        The Rake Arm Pivot Joint provides flexibility for the rake beam in uneven ground conditions unlike most competitors.

      • Rake Wheel Pivot

        The Rake Wheel Pivot also provides additional ground flexibility.

      • Rake Wheel Pivot

        The Rake Wheel Pivot also provides additional ground flexibility.

      • Raking Width

        Raking width on the H&S CR rakes can be adjusted to 3 different positions with the pin and fine tuned by adjusting the turnbuckle screw. The hitch jack is used to adjust the windrow width as shown.

      • Raking Width

        Raking width on the H&S CR rakes can be adjusted to 3 different positions with the pin and fine tuned by adjusting the turnbuckle screw. The hitch jack is used to adjust the windrow width as shown.

1108
NUMBER OF RAKE WHEELS 8
WHEEL DIAMETER 55″
TEETH PER WHEEL 40
TOOTH DIAMETER 7mm
TRANSPORT WIDTH 8′ 6″
TRANSPORT LENGTH 13′
WINDROW WIDTH ADJUSTMENT 3′ - 5′
RAKING WIDTH 15′ - 19′ — 3 Settings
RAKING WHEEL HUBS Tapered Bearings
WING FLEX Limited
2ND HOSE KIT Optional
HITCH JACK Standard
CENTER KICKER WHEEL N/A
TRANSPORT WHEELS 2 - ST175/80D13
WEIGHT 1125 lbs.
1110
NUMBER OF RAKE WHEELS 10
WHEEL DIAMETER 55″
TEETH PER WHEEL 40
TOOTH DIAMETER 7mm
TRANSPORT WIDTH 9′ 6″
TRANSPORT LENGTH 15′ 6″
WINDROW WIDTH ADJUSTMENT 4′ - 6′
RAKING WIDTH 18′ - 22′ — 3 Settings
RAKING WHEEL HUBS Tapered Bearings
WING FLEX Limited
2ND HOSE KIT Optional
HITCH JACK Standard
CENTER KICKER WHEEL Optional
TRANSPORT WHEELS 2 - ST175/80D13
WEIGHT 1275 lbs.
1112
NUMBER OF RAKE WHEELS 12
WHEEL DIAMETER 55″
TEETH PER WHEEL 40
TOOTH DIAMETER 7mm
TRANSPORT WIDTH 9′ 6″
TRANSPORT LENGTH 18′
WINDROW WIDTH ADJUSTMENT 4′ - 6′
RAKING WIDTH 20′ - 24′ — 3 Settings
RAKING WHEEL HUBS Tapered Bearings
WING FLEX Limited
2ND HOSE KIT Optional
HITCH JACK Standard
CENTER KICKER WHEEL Optional
TRANSPORT WHEELS 2 - ST175/80D13
WEIGHT 1440 lbs.

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

A 49″ Center Kicker Wheel is optional on the 1100, 2100, and 3100 Series Rakes.